V1602 Men's Standard FR Vented Coverall
- Flame Resistant
- Anti-Static
-
|
Lightweight vented coverall with a great fit and YKK non-sparking spiral zips throughout. Press studs and zippers are covered by fabric on the inside, so nothing but soft protective material comes in contact with your skin. Major seams are double- or triple-stitched and stress points are bar-tacked for strength. Reflective striping applied to shoulders is equal in length on the front and back. |
|
Material |
Red Wing Flashguard® Duralite™ (Quality 02), FR 93% Meta Aramid/5% Para Aramid/2% Antistat, 4.5 oz/yd²/150 g/m² |
|
Sizes |
32-70, Short/Reg/Tall/XTall |
|
Compliance |
EN ISO 11612, EN 1149-5, NFPA 2112 UL recognized component -fabric, IEC 61482-2 (Class 1) |
|
Technologies |
Flame Resistant Garment, Anti-Static Garment, Electric Arc Flash Protection |
|
Colors |
Tan(51), Petro Blue(52), Navy Blue(53), Royal Blue(54), Red(55), Graphite Gray(56), Orange(57) |
|
Features
-
Concealed two-way, black high-density polyester coil zip with press stud closure
-
Shoulder pleats for freedom of movement and comfort
-
Two chest pockets with flaps, right pocket with a concealed zip closure, left pocket with pen sleeve pocket
-
2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
-
Cargo pocket withconcealed zipand hook-and-loop closure on left leg
-
Concealed back mesh vented panel
-
Concealed press studs on cuffs
-
Two side pockets with hidden exterior-to-interior access
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
redwingsafety.com | © Red Wing Shoe Company, Inc.