Red Wing Safety

RED WING FOR BUSINESS

Return to Workwear Catalog
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro
  • widen.pdp.wrk.acc.micro

61620 Men's Standard Coverall

  • frFlame Resistant
  • catCategory 2
 
This coverall has a great look and fit. It features five pockets and concealed YKK® non-sparking front zipper and 100% brass press stud covered on the inside, so no brass comes in contact with your skin. Major seams are double- or triple-stitched, with stress points bar-tacked for added strength. 2"/50mm FR reflective tape applied to shoulders, legs and arms for added visibility and safety.
Material Daletec®, (Quality 10/20, 802536), FR 100% Cotton, 7.5 oz/yd²/250 g/m²
Sizes 32-70, Short/Reg/Tall/XTall
Compliance EN ISO 11612, IEC 61482-2 (Class 1), NFPA 2112 Whole Garment Certified
Technologies Flame Resistant Garment, Electric Arc Flash Protection, CAT2
Colors Tan(51)*, Petro Blue(52)*, Navy Blue(53)*, Royal Blue(54), Red(55)*, Graphite Gray(56)*, Orange(57)*, Yellow(59)*, Light Gray(76)*

Features

    • Elasticized waistband
    • 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
    • Two radio loops
    • Concealed press button on cuffs
    • Concealed two-way, heavy-duty brass zip with press stud closure
    • One back pocket
    • Two chest pockets with flaps, right pocket with a concealed zip closure, left pocket with pen sleeve pocket
    • Shoulder pleats for freedom of movement and comfort
    • Two side pockets with hidden exterior-to-interior access
 
Fitting Chart About Daletec®
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
 
 
xClose

Daletec®

This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions.  This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture.  Workwear made with Daletec material can also be specifies with optional antistatic properties.  Daletec fabrics have been third party certified to meet the requirements of EN 531.