Red Wing Safety

RED WING FOR BUSINESS

60119 Men's Premium Coverall

  • frFlame Resistant
  • asAnti-Static
 
This premium coverall has a classic look and provides optimal comfort, mobility and functionality. It features eight pockets and YKK® non-sparking zippers throughout. 100% brass press studs are covered on the inside, so nothing but soft protective material comes in contact with your skin. Major seams are double- or triple-stitched with stress points bar-tacked for added strength.
Material Daletec®, (Quality 19, 502551), FR 98% Cotton, 2% Antistat, 7.5 oz/yd²/250 g/m²
Sizes 32-70, Short/Reg/Tall/XTall
Compliance EN ISO 11612, EN 1149-5, IEC 61482-2 (Class 1)
Technologies Flame Resistant Garment, Anti-Static Garment, Electric Arc Flash Protection
Colors Tan(51)*, Petro Blue(52)*, Navy Blue(53)*, Royal Blue(54)*, Red(55), Graphite Gray(56)*, Orange(57)*, Yellow(59)*, Light Gray(76)*

Features

    • Concealed press studs on cuffs and ankle openings
    • Concealed two-way, black high-density polyester coil zip with press stud closure
    • Elasticized waistband
    • Left sleeve pocket with pen pocket divider, small flap with hook-and-loop closure
    • Shoulder pleats for freedom of movement and comfort
    • Tool pocket on right leg
    • Two back pockets, right side with flap
    • Two chest pockets with concealed zip closure
    • Two radio loops
    • Two side pockets with hidden exterior-to-interior access and press stud closure
 
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
 
 
xClose

Daletec®

This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions.  This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture.  Workwear made with Daletec material can also be specifies with optional antistatic properties.  Daletec fabrics have been third party certified to meet the requirements of EN 531.