Red Wing Safety

RED WING FOR BUSINESS

V1615 Men's Standard Vented Coverall

  • frFlame Resistant
  • asAnti-Static
 
This vented coverall has a great look and fit. It features five pockets and concealed YKK® non-sparking front zipper and 100% brass press stud covered on the inside, so no brass comes in contact with your skin. Major seams are double-stitched, with stress points bar-tacked for added strength. 2'/50mm FR reflective tape applied to shoulders, arms and legs.
Material Daletec®, (Quality 15, 502251), FR 98% Cotton, 2% Antistat, 6.5 oz/yd²/220 g/m²
Sizes 32-70, Short/Reg/Tall/XTall
Compliance EN ISO 11612, EN 1149-5, IEC 61482-2 (Class 1)
Technologies Flame Resistant Garment, Anti-Static Garment, Electric Arc Flash Protection
Colors Tan(51)*, Petro Blue(52)*, Navy Blue(53), Royal Blue(54), Red(55), Graphite Gray(56)*, Orange(57), Yellow(59)*, Light Gray(76)*

Features

    • Elasticized waistband
    • 2" (50mm) wide reflective FR striping around arms, legs and over the shoulders
    • Two radio loops
    • Under arm vents
    • Concealed two-way, black high-density polyester coil zip with storm flap
    • One back pocket
    • One pocket on left arm
    • Two chest pockets with flaps, right pocket with a concealed zip closure, left pocket with pen sleeve pocket
    • Shoulder pleats for freedom of movement and comfort
    • Two side pockets with hidden exterior-to-interior access
    • Concealed back mesh vented panel
    • Cargo pocket withconcealed zipand hook-and-loop closure on left leg
 
(*) = special order color
Stocked colors and sizes vary by location and are subject to change. Additional colors may be available. Please contact your Red Wing representative.
 
 
xClose

Daletec®

This flame retardant material is tested for resistance against flame flash and electrical arcs under realistic conditions.  This strong yet comfortable product has the properties of cotton, including absorption and transport of moisture.  Workwear made with Daletec material can also be specifies with optional antistatic properties.  Daletec fabrics have been third party certified to meet the requirements of EN 531.